How to install vSphere 6 ESXi using the Interactive Installer

An article by Graham Daly from VMware Blogs

Interactive installations are recommended for small deployments of four or less hosts. Installation using this method involves booting from the ESXi 6.0 installation media by inserting the media in to the host and following the prompts from the installation wizard to choose a destination disk in the host and begin the installation. Our video today […]]> Interactive installations are recommended for small deployments of four or less hosts. Installation using this method involves booting from the ESXi 6.0 installation media by inserting the media in to the host and following the prompts from the installation wizard to choose a destination disk in the host and begin the installation. Our video today demonstrates how to install vSphere 6 ESXi using the Interactive Installer.

The ESXi installation media can be connected to the host in a few different ways:

  • Inserting the CD/DVD in to the DVD-ROM drive in the server
  • Plugging in a bootable USB device
  • Mounting an ISO remotely

When instructed to begin, the installer reformats and partitions the target disk and installs the ESXi boot image. If you have not installed ESXi on the target disk previously, all data located on the drive is overwritten, including hardware vendor partitions, operating system partitions, and associated data.

Note: The formatting and partitioning done by the ESXi installer is permanent and overwrites existing data. To ensure that you do not lose any data, migrate any important data from the host to another machine before you install ESXi. If you are installing ESXi on a disk that contains an installation of ESXi/ESX or a VMFS datastore, you are presented with upgrade options.

For additional information, see VMware Knowledge Base article Methods for installing ESXi 6.0 (2109708).

Be Sociable, Share!
 

Tags: , , , , , ,

Comments

No comments so far.

  • Leave a Reply
     
    Your gravatar
    Your Name